Table plants used to decorate, increase fortune and luck according to feng shui are a trend favored by most offices and offices today. These beautiful mini table planters give you the comfort to do your best work. Desktop plants or houseplants always bring useful values to each home and each office.
However, to grow such table bonsai pots is not a simple task and not everyone can do it, taking care of how to keep the plant always lush and healthy is very necessary…
So how to grow lush table bonsai? In the following article, we will guide you on how to properly plant and care for table plants.
Table plants come in ɱaпy different varieties, each of which has its own unique adaptive properties. Therefore, to grow a bonsai pot properly and lushly, the first thing you need to prepare is not the soil, pot or plant but the knowledge of the plant you want to grow. Finding out the characteristics of the plant you will partly know what the plant is suitable for the soil, what kind of pot to plant with is beautiful and how to care for it effectively. Mini desktop bonsai is usually much smaller in size than ordinary office bonsai models, so you also try to be a little clever to make growing plants simpler. When you learn about table bonsai, you probably also know that mini table bonsai plants will be grown with 2 main types: soil and in solution (nutrient water).
Below we will learn in detail what materials to prepare and come up with how to properly grow table bonsai on each type.
The materials to be prepared for planting plants include: Bonsai pots, Soil for plants, Nutrient water solution, Bonsai, Water for watering plants
1. Proper soil and plant preparation:
It is first necessary to wet the soil and mix well before planting. You can mix the soil yourself with straw, hay, fertilizer, put it all in a wooden barrel or wheelbarrow and mix well. If you buy a bag of organic soil sold outside the store, you just need to add water and mix it right in the bag before pouring it into the pot. After positioning the plant in the pot according to your preference, put the soil around and pat the soil to seal the crevices in the pot.
Note: Do not fill the pot with soil, because when irrigating, the plant will not absorb it, but also cause water to overflow and waste. For example, a pot size of 6-13 cm should have a distance of 1 cm from the planting ground to the edge of the pot wall. Pots size 14-19 cm need a distance of 2 cm. A pot size of 20-23 m needs a distance of 2.5 cm. A pot size of 25-30 cm needs a distance of 3.5 cm.
Land for ornamental plants has ɱaпy types and in ɱaпy ways each person will have different ways of choosing soil. In this article, we recommend using bags of soil for plants sold in bonsai stores and simply mixing water. Or more sophisticated, you can completely create your own soil with ingredients such as fertilizer soil, straw, humus or bark, loose materials that can decompose and create nutrients.
You need to note that the soil for planting plants must ensure that there is moisture and nutrition (nutrients here are fertilizers) necessary for plant growth. Once you have prepared the soil, you will move on to the next step of planting the plant in a pot. You should first divide the potted plant into 3 parts in which the bottom part is lined soil, the stem is covering the base of the plant and the top part is for other decorative miniatures.
When fixed, you should only press lightly so that the plant does not lean, not compress too tightly. At this point, ɱaпy of you will probably wonder why such a segment? The segmentation of pots will help you easily balance the amount of soil and cover for the plant. Here, you should also note that you should not fill the soil through the mouth of the pot, because when watering the soil will spill out and another part will lose the aesthetics of the bonsai. Instead, you can choose miniature, funny miniature accessories to decorate the pot more vividly.
2. Watering regularly and properly:
Due to planting in a tub, the plant will dry out quickly and need to be watered regularly throughout the day. To know when the plant needs water, press your finger against the soil in the pot, if dry hands mean the plant needs water, then water. ɱaпy gardeners think that watering should be done as much as possible, however this is a misconception. Watering will wash away the nutrient layer on the surface of the planting, the plant’s food source will be quickly depleted. To compensate for the loss of nutrients, plants must be fertilized according to certain processes and cycles throughout the growing process. During the growth period, watering is extremely important.
Instructions on how to properly plant and care for table plants.
A good rule of thumb is that you don’t let the soil get too dry and need to be watered quickly, but also don’t let the plant flood with too much water. ɱaпy indoor plants die from excessive watering and you should remember not to submerge the plants in water for more than 2 hours as it will cause the plant to die or become waterlogged, the subsequent treatment will be quite troublesome. City water is treated with chemicals to ensure your safety, however most table plants, ornamental plants or houseplants do not like chlorine or fluoride, so it is a very good idea to leave the water in a jar for at least 24 hours before using it to irrigate plants. Maybe one thing you and I both know is not to water too cold or too hot. You can let the water for a long ᴛι̇ɱe let the water temperature equalize with room temperature and then water the plants.
3. Fertilizing plants:
Like animals, plants need nutrients throughout their life cycle. You can use a variety of commercially available organic fertilizers and apply them according to plant safety guidelines. Most potted plants need to be fertilized 10 to 14 days apart. The most common way to fertilize ornamental flowers is to dissolve the fertilizer in a slightly warm water solution with a concentration according to the ɱaпufacturer’s instructions. Note: Before fertilizing, make sure the pot is moist enough. This allows the fertilizer to be absorbed quickly and evenly.
Instructions How And Care For Desktop Bonsai Properly.
Only mix enough capacity for one-ᴛι̇ɱe use and never store. Use a separate container to blend partitions and do not use it for any other purpose. If chemical substances are used, make sure their storage is absolutely safe. The use of sticks and pellets is easier, faster, and cleaner. The stick pattern is imprinted deep into the ground about 1cm from the city. Fractional members were also added to the soil in the same position. It is possible to use a dedicated tool to allow members to analyze into the decoration which will earn more money. The stick and pellet formats provide nutrients for the landscape for a long ᴛι̇ɱe, but have the disadvantage of making the loose landscape more prone to crowding the ɱaпure sites.
4. How to Clip Desktop Bonsai with Nutrient Water Solution:
Unlike desktop plants grown from the ground, plants grown in water have a living environment that is water with hydroponic solution, mixed with the most appropriate ratio, which certainly provides nutrients for plants to grow and does not overwhelm. dead tree. To ensure the most appropriate nutrient water, you should buy it at the bonsai store to get direct support of the ratio of nutrients in the water. The standard water level for plants in hydroponics is as high as old trees. When the ratio of plants is valid and water is appropriate, you can use temporary foam to fix the plant.
5. Create Enough Light For Plants To Grow:
The cause of the tree is easy to die and wither
In fact, trees bought for a while wither and die often do the following reasons:
1. Selection of trees not suitable for living conditions.
Plants do not adapt to temperature, humidity and light, causing the plant to grow poorly, even wilt or die.
2. Choose the wrong size of plants and pots.
When choosing to plant trees, it is necessary to choose suitable plants such as: porcelain, plastic, cement grinding stone. Choose a pot with a large space, enough soil for the new plant to grow well.
Too small a planter not only lacks nutrients, but also causes hair loss to touch the bottom of the pot, excess water converges at the bottom, making ɱaпy plants easy to rot, water gun.
Lưu ý không nên chọn chậu không có lỗ thoát nước vì dễ khiến cây bị ngập úng.
3. Not promising or springing too much water:
With indoor bonsai – especially plants living in an air-conditioned environment, they should not be flooded with too much water for the plants.
If you do not reap the water or reap too much, it will cause the plants to turn yellow and wilt. You should only cut the tree 2-3 ᴛι̇ɱes/week.
